OEM aro pneumatic diaphragm pump
Features
• 1 in (25.4 mm) center- and end-porting
• High flow – 35 gpm (133 lpm) in a compact, portable size
• Fluid pressure to 120 psi (8.4 bar, 0.84 MPa)
• Epoxy-coated center section for corrosive environments
• Equipped with an effective and reliable air valve system
• External controller for optional remote operation
Typical Applications
• Drum fluid transfer
• Unloading fluids
• Chemical evacuation
• Ceramic glaze supply
• Dewatering and sump evacuation
• Tank and sump drainage
Typical Fluids Handled
• Chemicals
• Contaminated surface water
• Adhesives, varnishes, dispersions, solvents and stains
• Resins, latexes, wood preservative stains, concrete paints and primers
• Ceramic slips and slurries
| Max working pressure | 120psi(0.84Mpa,8.4Bar) |
| Max flow rate | 35gpm(133lpm) |
| Max Suction Height (Dry Suction) | 5m |
| Max Permitted Grain | 3.2mm |
| Max. Air Consumption | 1.7m³/min |
| Air Inlet size | 1/4 inch |
| Air Outlet Size | 1/4 inch |
| Fluid Inlet | 1’’ |
| Fluid Outlet | 1’’ |
| Weight | 11KG |
Write your message here and send it to us
